Products

Standard products. Custom when you need it.

Proven platforms you can order today, configured to your system — and a growing line of RF-over-Fiber and GNSS products arriving in 2027.

Available now

Pharos Series

Compact 4-Channel RFoF System · E200001

A two-unit RF-over-Fiber link built for military TVRO. The remote unit mounts at the antenna; the central unit sits in a standard rack below decks. Install the Tx and Rx modules in the order your system needs, and the same platform carries receive-only or transmit/receive traffic.

E200001-1 Fiber Optic Remote Unit, three-quarter view of connector panel
E200001-1 · Fiber Optic Remote Unit
E200001-1 Remote Unit, top view with nameplate
E200001-1 · Top view
E200001-2 Fiber Optic Central Unit, 1RU rackmount, three-quarter front view
E200001-2 · Fiber Optic Central Unit, 1RU
E200001-2 Central Unit rear panel: power inlet, Ethernet, optical connector, and four color-coded RF ports
E200001-2 · Rear panel: power, Ethernet, optical, and RF channels VL · VH · HL · HH

Key features

  • Four RF channels — VL, VH, HL, and HH — covering 250–3,000 MHz over single-mode fiber
  • Bidirectional M&C channel modulated onto one L-band channel, carrying antenna monitor-and-control between the antenna and the ACU
  • Receive-only or transmit/receive, set by Tx and Rx module install order
  • MIL-PRF-28876 fiber optic and RJF21G ruggedized Ethernet connectors
  • 24 VDC output at the remote unit
  • Front-panel and connector-side status indicators
  • Universal 100–240 VAC input on both units

Performance

Frequency range250–3,000 MHz
Fiber typeSingle-mode
Max link distance[TO CONFIRM]
RF gain / flatness[TO CONFIRM]
Operating temperature[TO CONFIRM]

Units and interfaces

InterfaceE200001-1 Remote UnitE200001-2 Central Unit
MountingBulkhead mount at the antenna19-inch rack, 1RU
RF ports4 × VL · VH · HL · HH, 250–3,000 MHz4 × VL · VH · HL · HH, 250–3,000 MHz
M&CBidirectional antenna M&C channel between the antenna and the ACU, modulated onto one L-band channel
OpticalMIL-PRF-28876 (M28876), single-modeMIL-PRF-28876 (M28876), single-mode
EthernetRJF21G ruggedized RJ45RJF21G ruggedized RJ45
Power100–240 VAC, 60 Hz, circular connector100–240 VAC, 50/60 Hz, IEC inlet
DC output24 VDC (J4E)—
IndicatorsPower, module status, 24 VDC statusPower, module status
CoolingFanFan
Request a quote Request a spec sheet
Coming 2027 · In development

Talos Series

IP67 Multi-Band RFoF System

A sealed IP67 RF-over-Fiber platform for teleports, ships, and tactical sites where the equipment lives outdoors. Each unit is configured to order — any band from VHF through Ka, with the transmit and receive channels your system needs.

IP67 RFoF System enclosure, three-quarter view showing cooling fins and connector panel
Talos Series · Finned, sealed enclosure
IP67 RFoF System, top view of the finned lid
Top view
IP67 RFoF System connector panel, front view
Connector panel

Key features

  • Any band from VHF through Ka, configured to your system
  • Transmit, receive, or mixed channels in one enclosure
  • Each band converted on its own optimized path, then combined by CWDM onto one single-mode fiber per channel
  • Bidirectional monitor-and-control (Ethernet over coax) carried on the same fiber as the RF
  • 12-channel TFOCA-II tactical fiber optic connector, sealed and field-mateable
  • Status LEDs and SNMP monitoring

Configuration

FrequencyVHF through Ka-band
ChannelsTx, Rx, or both — configured to order
FiberSingle-mode, one fiber per channel
M&CEthernet over coax, on the same fiber
Part numberingEach unique configuration receives its own dash number

Design standards

Ingress protectionIP67 per IEC 60529 — dust-tight, immersion to 1 m for 30 minutes
EnvironmentalMIL-STD-810H, tailored to the deployment profile, including Method 510 (dust) and Method 512 (immersion)
EMCMIL-STD-461G, tailored
SATCOM interoperabilitySupports MIL-STD-188-164C with Change 1 for SHF SATCOM earth terminals
Fiber opticsAligned with applicable parts of MIL-STD-1678
Optical connector12-channel TFOCA-II, environmentally sealed

In development. Specifications are design targets and may change before release.

Discuss early requirements

Also coming in 2027

GNSS products.

Two GNSS standard products are in development. Contact us to discuss early requirements.

Coming 2027

Kairos Series

GNSS Time Server

Synchronization timing for every network node, plus a stable 10 MHz reference to lock the LO of SSPAs, LNBs, and other RF equipment.

Coming 2027

Tiphys Series

GNSS Heading System

Precise position and true heading from dual GNSS antennas — for navigation and stabilized antenna pointing.

Need something that isn't in the catalog?

Most custom work starts from one of these platforms. Tell us the frequencies, distances, and environment, and we'll engineer the rest.

Talk to an engineer